forked from SimplesIP/pabx-app
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
75 lines
2.6 KiB
75 lines
2.6 KiB
; Asterisk SMDI configuration |
|
|
|
[interfaces] |
|
; Specify serial ports to listen for SMDI messages on below. These will be |
|
; referenced later in chan_dahdi.conf. If you do not specify any interfaces then |
|
; SMDI will be disabled. Interfaces can have several different attributes |
|
; associated with them. |
|
|
|
; Set the number of stop bits to use per character here. The default is no, |
|
; in which case one stop bit will be used. |
|
|
|
;twostopbits = no |
|
|
|
; Character size or bit length is the size of each character sent across the |
|
; link. Character size can be 7 or 8. The default is 7. |
|
|
|
;charsize = 7 |
|
|
|
; If you need parity checking enabled you can turn it on here. Acceptable |
|
; values are even, odd, and none. The default is even. |
|
|
|
;paritybit = even |
|
|
|
; The baudrate to use for this port. Acceptable values are 1200, 2400, 4800, |
|
; and 9600. The default is 9600. |
|
|
|
;baudrate = 1200 |
|
|
|
; Often the numbering scheme for a set of mailboxes or extensions will not be 7 |
|
; or 10 digits (as SMDI requires). Use the msdstrip option to strip unused |
|
; digits from the start of numbers. |
|
|
|
;msdstrip = 0 |
|
|
|
; Occasionally Asterisk and the SMDI switch may become out of sync. If this |
|
; happens, Asterisk will appear one or several calls behind as it processes |
|
; voicemail requests. To prevent this from happening, adjust the msgexpirytime. |
|
; This will make Asterisk discard old SMDI messages that have not yet been |
|
; processed. The default expiry time is 30000 milliseconds. |
|
|
|
;msgexpirytime = 30000 |
|
|
|
;smdiport => /dev/ttyS0 |
|
|
|
|
|
[mailboxes] |
|
; This section configures parameters related to MWI handling for the SMDI link. |
|
|
|
; This option configures the polling interval used to check to see if the |
|
; mailboxes have any new messages. This option is specified in seconds. |
|
; The default value is 10 seconds. |
|
; |
|
;pollinginterval=10 |
|
|
|
; Every other entry in this section of the configuration file is interpreted as |
|
; a mapping between the mailbox ID on the SMDI link, and the local Asterisk |
|
; mailbox name. In many cases, they are the same thing, but they still must be |
|
; listed here so that this module knows which mailboxes it needs to pay |
|
; attention to. |
|
; |
|
; Syntax: |
|
; <SMDI mailbox ID>=<Asterisk Mailbox Name>[@Asterisk Voicemail Context] |
|
; |
|
; If no Asterisk voicemail context is specified, "default" will be assumed. |
|
; |
|
; Before specifying mailboxes, you must specify an SMDI interface. All mailbox |
|
; definitions that follow will correspond to that SMDI interface. If you specify |
|
; another interface, then all definitions following that will correspond to the |
|
; new interface. |
|
; |
|
;smdiport=/dev/ttyS0 |
|
;2565551234=1234@vmcontext1 |
|
;2565555678=5678@vmcontext2 |
|
;smdiport=/dev/ttyS1 |
|
;2565559999=9999
|
|
|